| Web: | mayocliniclabs.com |
|---|---|
| Email: | mcl@mayo.edu |
| Telephone: | 800-533-1710 |
| International: | +1 855-379-3115 |
| Values are valid only on day of printing | |
Test Id : FHSPL
Histamine Plasma
Method Name
A short description of the method used to perform the test
A short description of the method used to perform the test
Enzyme Immunoassay (EIA)
NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.
Indicates the status of NY State approval and if the test is orderable for NY State clients.
Yes
Reporting Name
Lists a shorter or abbreviated version of the Published Name for a test
Lists a shorter or abbreviated version of the Published Name for a test
Histamine Plasma
Aliases
Lists additional common names for a test, as an aid in searching
Lists additional common names for a test, as an aid in searching
FHSPL
Histamine
Specimen Type
Describes the specimen type validated for testing
Describes the specimen type validated for testing
Plasma EDTA
Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing
Defines the optimal specimen required to perform the test and the preferred volume to complete testing
Specimen Type: Plasma
Collection Container/Tube: Lavender top (EDTA)
Submission Container/Tube: Plastic vial
Specimen Volume: 3 mL
Collection Instructions:
Draw 3 mL blood in a lavender-top (EDTA) tube(s). Cool immediately on ice. Centrifuge at 1500 rpm for 10 minutes at 4 degrees C. The centrifugation should be performed within 20 minutes of collection. Carefully remove 1 mL of EDTA plasma from the upper part of the tube. Freeze and send frozen in a plastic vial.
Specimen Minimum Volume
Defines the amount of sample necessary to provide a clinically relevant result as determined by the Testing Laboratory
Defines the amount of sample necessary to provide a clinically relevant result as determined by the Testing Laboratory
1 mL
Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected
Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis | Mild reject ; Gross reject |
| Lipemia | Mild reject; Gross reject |
| Icterus | NA |
| Other | Specimens other than Plasma EDTA. Test is strict frozen |
Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included
| Specimen Type | Temperature | Time | Special Container |
|---|---|---|---|
| Plasma EDTA | Frozen (preferred) | 28 days |
Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
<1.0 ng/mL
PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information
Indicates whether the report includes an additional document with charts, images or other enriched information
No
Day(s) Performed
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.
Monday, Tuesday, Thursday
Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.
2 to 7 days
Performing Laboratory Location
Indicates the location of the laboratory that performs the test
Indicates the location of the laboratory that performs the test
Eurofins Viracor
Fees
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.
- Authorized users can sign in to Test Prices for detailed fee information.
- Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
- Prospective clients should contact their Regional Manager. For assistance, contact Customer Service.
Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.
This test was developed and its performance characteristics determined by Viracor Eurofins. It has not been cleared or approved by the U.S. Food and Drug Administration.
CPT Code Information
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
CPT codes are provided by the performing laboratory.
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
CPT codes are provided by the performing laboratory.
CPT codes are provided by the performing laboratory.
83088
LOINC® Information
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.
| Test Id | Test Order Name | Order LOINC Value |
|---|---|---|
| FHSPL | Histamine Plasma | 2416-6 |
| Result Id | Test Result Name |
Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
|
|---|---|---|
| FHSPL | Histamine Plasma | 2416-6 |
Test Setup Resources
Setup Files
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.
Sample Reports
Normal and Abnormal sample reports are provided as references for report appearance.
Normal and Abnormal sample reports are provided as references for report appearance.
SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.