A short description of the method used to perform the test
NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.
Lists a shorter or abbreviated version of the Published Name for a test
MVista Histoplasma Antigen
Lists additional common names for a test, as an aid in searching
Histoplasma capsulatum Antigen
Histoplasma Polysaccharide Antigen Detection
Describes the specimen type validated for testing
Defines the optimal specimen required to perform the test and the preferred volume to complete testing
Submit only 1 of the following specimens:
Collect 2 mL of Bronchial Washing in leak proofed container.
1. Label specimen appropriately (Bronchial Washing)
Collect 2 mL of Body Fluid in leak proofed container.
1. Label specimen appropriately (Type of Body Fluid)
Note: MiraVista will test most body fluids with the following disclaimer: The reference range and other method performance specifications have not been established for this test in this type of Body Fluid. The test results should be integrated into the clinical context for interpretation.
Note: Minimum volume does not allow for repeats.
Specimen Minimum Volume
Defines the amount of sample necessary to provide a clinically relevant result as determined by the Testing Laboratory
Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected
| Hemolysis || NA |
| Lipemia || NA |
| Icterus || NA |
| Other || Specimen that is too viscous to pipette. Tissue, biopsy, sputum, bronchial brush, tracheal aspirate, FNA, bone marrow aspirate, stool or samples in transport media, fixative or Isolator tubes |
Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Reference interval: None Detected
Reportable Range: Positive Results reported in ng/mL from 0.20 ng/mL to 20.00 ng/mL
Positive Results above 20.00 ng/mL are reported as “Above the Limit of Quantification”.
Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances
Interfering Substances & Cross-Reactivities:
Sputolysin, sodium hydroxide and potassium hydroxide treatment degrade the analyte detected in the assay. Cross-reactions are seen with blastomycosis, paracoccidioidomycosis, penicilliosis, less frequently in coccidioidomycosis, rarely in aspergillosis, and possibly sporotrichosis.
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.
- Authorized users can sign in to Test Prices for detailed fee information.
- Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
- Prospective clients should contact their Regional Manager. For assistance, contact Customer Service.
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.
This test was developed and its performance characteristics determined by MiraVista Diagnostics. It has not been cleared or approved by the FDA; however, FDA clearance or approval is not currently required for clinical use. The results are not intended to be used as the sole means for clinical diagnosis or patient management decisions.
CPT Code Information
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.
CPT codes are provided by the performing laboratory.
Test Setup Resources
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.
Excel | Pdf
SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.
SI Normal Reports |
SI Abnormal Reports